After a long day at the office and a long drive home, all you can think of is a nice shower and a cup of coffee watching your favorite baseball game. You come home and press the button on the remote control to open the garage door so you can park your car and start the night. Nothing happens, the garage door won’t open. You click the button repeatedly in frustration, but to no avail. The last thing you want to deal with is a garage door repair in Austin!
In such a case, most people would call the repairers immediately or go looking for them. How about taking a look at the problem yourself, before hailing a taxi or going to the nearest dealership or repair shop? Perhaps, it is not as big of a problem as you think it is, and you can solve it all by yourself. Remember, a manual was provided to you on the day of your garage door installation, which has some troubleshooting guidelines. Of course, it is the first thing to look at.
Let’s see what else you can do when your system is malfunctioning.
1. Remote failure is often the most common cause of door failure. Always carry a replacement unit with you, so that you can check if the problem is with the remote control or elsewhere.
2. In case your remote seems fine, check the sensors, which receive signals from your remote. Make sure the sensors are not covered in dust or anything else because that can block the smooth transmission of signals.
3. After you have checked the remote control, check that the hinges and rollers the door moves on are properly lubricated. This is one of the main reasons, that it slowly and steadily makes things worse, and in the end, you have to spend some money on Austin garage door repairs.
4. Also check if all cables and wires are connected properly and if there are no mismatched wires. A main indicator of this problem is a door jam in the middle or right next to the floor. The door would fluctuate and stop randomly in the middle of opening and closing.
5. The rails by which the door opens and closes are held in place by brackets, which can come loose and cause the door to be improperly closed or closed. You can easily fix the problem by slowly tightening the nuts and bolts.
6. There is a possibility that the tracks are dented or warped if your garage door is old and it has been a while since it has been professionally inspected. You can try to get them back in shape with a hammer. Make sure you don’t hit too hard or you could break everything.
7. If you live in an excessively cold place, there is a possibility that the door will jam. Look at the settings one more time and see if adjusting the pressure can help.
8. The last thing you can check is the torsion spring. The opening and closing of the garage door is controlled by this spring installed on the top of the door. This is what pulls on your heavy door and is under immense stress. Be careful, this is the dangerous part and you should probably always call in the specialists, unless you have the experience and the tools yourself.
In general, it is recommended that anything other than these issues is beyond your unprofessional jurisdiction, and you should call an Austin garage door repair professional. Also, check if your garage door parts are out of date. These parts have a working limit and are supposed to be changed after a certain period of time. In case any of them have expired, you have to get new replacement parts for your garage door from a reputable store or dealer, if you want to have a restful sleep by making sure that no one can sneak in through the ajar garage door.