The energy of the Sun is absolutely FREE! You don’t have to pay expensive electricity bills when you have an alternative. Try to learn how to make solar panels as it is the best way to power your home. You may not know it, but these solar frames are made up of cells like photovoltaic cells. Photovoltaic cells collect energy from the sun and transform it into electricity or convert it into heat.
The so-called photovoltaic effect was discovered in 1839 by Alexandre-Edmond Becquerel, who was then 19 years old. However, the boy did not know how to harness solar energy using the photovoltaic effect. Solar energy was put to use by Charles Fritts, who successfully manufactured the first solar cell in 1882. The first solar energy collector was made of thin sheets of selenium coated with gold. The use of the cell to produce electricity and generate heat had been widely used since the early 1900s.
The term photovoltaic effect actually refers to the physical process that the cell must undergo to convert the sun’s rays into electricity. Solar panels come in many different shapes, sizes, and styles, which is why they can be applied to so many different types of spaces, fixtures, or structures such as awnings, roofs, buildings, apartments, greenhouses, condominiums, residential houses, or fields.
No matter what the shape or size is, there seems to be a common pattern on how to make solar panels. Depending on the type of materials used in the manufacture of the power frames, you can come up with and earn money with the following way, such as:
Amorphous Silicon Panel
This class has the lowest electricity return rate compared to any type of solar power generator. It is not made from crystalline silicon, so its rate of return on electricity is between five and six percent. The amorphous silicon panel is understood as a piece of semiconductor metal such as copper and a thin strip of silicon on top that connects to some pieces of metal.
Thread Tape Silicone Panel
The yarn tape type is constructed like the polycrystalline silicon panel with approximately the same rate of return of electricity. The difference between the two is that the photovoltaic cells in a wire ribbon silicon panel are made up of thin strips of silicon that are attached to metal rods that connect the strips to form a cell instead of using a square of solid silicon.
In terms of investment cost, the price of a wire ribbon silicon panel is lower than that of a polycrystalline silicon panel. You may want to know how to make silicone tape solar panels due to its tempting cost.
Polycrystalline Silicon Panel
From the Greek word poly meaning multi, polycrystalline silicon comprised of multiple individual photovoltaic cells with metallic conductors tucked into the sides of the panel for better conductivity and to help excite electrons. The panel generates a return on electricity of approximately twelve to fourteen percent. It is also observed that this type of panel is not as efficient as the monocrystalline type of silicon solar panel.
So far this is the cheapest type of solar panel and makes it too easy for consumers to buy. Its maintenance cost is relatively lower compared to that of the monocrystalline solar panel for the simple reason that it simply replaces or repairs the individual cell that has been damaged without the need to replace the entire panel.
Monocrystalline Silicon Panel
Mono means simple, therefore it is composed of a monocrystalline silicon sheet with metals tucked in at the ends to excite electrons and increase conductivity. This type has been proven to be more efficient and can be considerably more expensive compared to the others, but it can return an electricity rate of fourteen percent to eighteen percent.
Your doubts, comments, suggestions or recommendations on how to make solar panels with photovoltaic effect are WELCOME! Thank you for reading.